NON-INVASIVE • NO DOWNTIME • NATURAL RESULTS
3DEEP® Technology delivers advanced RF energy deep into the skin to stimulate collagen renewal, helping tighten and firm the skin comfortably and effectively. Its patented design combines precise energy delivery with built-in safety features for a comfortable, non-invasive treatment experience.
Treatment Areas
Duration
30 Min
Pain Level
Low
Technology
3DEEP Focused RF
Results
Superior Lifting and Firming
Sessions Needed
The number of treatment sessions required depends on the individual’s desired level of lifting and firming.
Lasting Duration
The initial session provides a lasting effect of 2-4 weeks. With subsequent sessions, the results can approach a semi-permanent state.
Frequency of Treatment
Weekly (severe case ), bi- monthly to monthly or once every 2 month as maintenance
3DEEP Skin Science
The Power of 3DEEP®
3DEEP® Technology tightens and firms the skin by stimulating the body’s collagen renewal process. Whereas older monopolar or bipolar RF technologies can often be painful or risky to the epidermis, 3DEEP® is the only technology that uniquely uses six independent, phase-controlled RF generators to deliver maximum, controlled energy to the depths of the dermis, with minimal epidermal heat or pain for optimal, painless collagen remodeling.
Unique Safety & Control Features
Real-Time Impedance Monitoring
Ensures precise and consistent energy delivery throughout treatment.
Motion-Activated Energy Delivery
RF energy is released only when the handpiece is in motion for enhanced safety.
Built-In Contact Sensor
Prevents energy discharge unless full contact with the skin is maintained.
Comfort-Focused Technology
Minimizes surface heat for a safe and comfortable treatment

ENDYMED™ Face V-Lift

ENDYMED™ Eye Lift

ENDYMED™ Arms
AS featured in







Why ENDYMED™?
Endymed™ is a world leader in non-invasive, medical aesthetic treatment solutions for facial and body skin tightening and contouring. Its FDA-approved 3DEEP® radiofrequency technology delivers a superior, cutting-edge solution for non-invasive wrinkle reduction, skin tightening, fractional skin resurfacing, and RF micro needling for both the face and body contouring and acne scar treatment.
Virtually pain-free, safe, convenient treatment
Noticeable immediate improvement with long-term visible results
Optimal safety with minimal or no discomfort, and no side effects
Fast walk-in/walk-out pleasant treatment experience
Our 3 ENDYMED™ Handpieces

iFine • 1.5 mm
Eye-area fine lines, firmness & collagen stimulation

Small • 4 mm
Facial tightening & collagen remodelling without intentionally targeting deeper facial fat

Mini-Shaper • 7 mm
Deeper facial/body contouring where localised fatty volume is also part of the concern
ENDYMED™ Pure+
3DEEP helps regenerate collagen in the dermis layer and uses various handpieces to improve skin texture, reduce pores, and improve inflammatory skin conditions such as acne and redness, tailored to individual skin conditions.
Stronger & clinically proven treatments
Complete flexibility
The ultimate skin resurfacing tool
More effective body treatment
3DEEP® Advantages
6 RF generators used simultaneously for optimal collagen remodeling
Deep controlled energy to dermis, reaching 52° - 55°c, with minimal epidermal heat
Absolutely safe & pain free
ENDYMED™ 3DEEP® RF
Frequently Asked Questions
New to Endymed™? We’ve put together the most common questions customers ask before their first treatment — from how 3DEEP® RF works and which handpiece we use, to results, facial fat reduction, comfort, downtime and treatment suitability.
At Ombré, we have 3 Endymed handpieces with different heating depths: iFine 1.5 mm, Small 4 mm and Mini-Shaper 7 mm.
This allows us to customise your treatment according to what you actually want to improve, rather than treating every face in exactly the same way.
Endymed™ is a professional radiofrequency (RF) treatment system using proprietary 3DEEP® technology.
It delivers controlled RF energy to create heating within targeted tissue. This thermal effect is used for concerns such as skin tightening, collagen remodelling, wrinkles and facial or body contouring.
At Ombré, the Endymed treatments we offer are non-invasive — there are no needles, injections or surgical incisions involved.
More importantly, we don’t use just one Endymed handpiece for everyone.
We have iFine, Small and Mini-Shaper, each designed to create heating at a different depth.
3DEEP® is Endymed’s multi-source, phase-controlled radiofrequency technology.
Multiple RF fields work together to deliver controlled energy into the targeted tissue, creating volumetric heating.
This controlled thermal effect can cause an immediate response in existing collagen fibres while also initiating a longer-term collagen-remodelling process.
Over time, this can improve the appearance of:
* Skin laxity
* Fine lines and wrinkles
* Reduced firmness
* Facial contours
* Jawline definition
With the appropriate deeper handpiece, localised fatty volume and deeper contouring can also form part of the treatment objective.
THE 3 ENDYMED HANDPIECES AT OMBRÉ
Because different concerns require treatment at different depths.
According to Endymed’s handpiece specifications, heating depth is influenced by the
geometry of the electrodes together with energy, including power and time.
The three handpieces available at Ombré have different heating depths:
iFine — 1.5 mm heating depth
Main area: Eyes
Our most superficial and targeted Endymed handpiece.
We use iFine around the delicate eye area to focus on concerns such as:
* Fine lines
* Wrinkles
* Crepey-looking skin
* Loss of firmness
* Mild eye-area skin laxity* Collagen stimulation
The objective here is skin tightening and rejuvenation — not fat reduction.
Main area: Face
Small is our facial handpiece when the objective is primarily:
* Skin tightening
* Improving laxity
* Wrinkle reduction
* Firmness
* Collagen remodelling
* Facial rejuvenation
It is particularly useful for customers who do not want us to deliberately target deeper facial fatty tissue.
For example, someone may already have a slim face but feel that their skin is becoming looser or more wrinkly.
In that situation, making the face even slimmer may not be desirable.
Mini-Shaper — 7 mm heating depth
Main areas: Face & Arms
Mini-Shaper provides our deepest heating depth of the three handpieces at 7 mm.
We may select Mini-Shaper when the treatment objective includes:
* Deeper facial contouring
* Fuller lower face
* Double-chin area
* Localised fatty volume
* Jawline definition
* Arm contouring
* Skin tightening together with deeper contouring
Because Mini-Shaper reaches deeper tissue, it can be selected when fatty volume is part of what we want to target, in addition to tightening.
No.This is very important.
Mini-Shaper reaching 7 mm does not automatically make it “better” than Small at 4 mm or
iFine at 1.5 mm.
The correct question is:
“Which tissue are we trying to target?”
If we’re treating delicate eye-area skin, we don’t need a 7 mm treatment.
If someone has a naturally slim face and wants skin tightening without further facial volume
reduction, deeper fat-targeting may not be desirable.
If someone has a fuller lower face and wants deeper contouring, Mini-Shaper may make more sense.
The right handpiece is the one that matches your concern — not simply the deepest one.
Endymed V-Lift is our RF treatment focusing on the lower face, jawline and double-chin region.
Depending on your facial condition, the treatment objective may be:
Skin tightening & collagen remodelling
OR
Skin tightening + deeper facial contouring
This is why we don’t automatically use the same handpiece for every V-Lift customer.
Duration: approximately 30 minutes
Price: $98 nett
It depends on your face and what you want to achieve.
Small — 4 mm
We may choose Small when you primarily want:* Firmer skin
* Improved skin laxity
* Collagen stimulation
* Wrinkle improvement
* Facial tightening
without intentionally targeting deeper facial fat.
Mini-Shaper — 7 mm
We may consider Mini-Shaper when you have:
* A fuller lower face
* Double chin
* Localised fatty volume
* Heavier-looking contours
and deeper contouring is also part of your desired result.
Our therapist will assess your facial condition and discuss your goal before deciding.
It can help with facial contouring when the appropriate handpiece is used. If your facial fullness is partly related to suitable localised fatty volume, Mini-Shaper may be selected to provide deeper heating and contouring.
Over a course of treatments, this can contribute to a slimmer and more defined appearance in suitable customers.
However, facial shape is also influenced by bone structure, muscle, genetics, overall weight
and fat distribution.
Results therefore vary between individuals.
It is important to distinguish between our handpieces.
iFine: Fat reduction is not the treatment objective.
Small: Primarily selected for skin tightening and collagen remodelling without intentionally
targeting the deeper fatty layer.
Mini-Shaper: Its deeper 7 mm heating depth allows deeper tissue and localised fatty volume to form part of the treatment objective.
With appropriate treatment, thermal effects at the targeted fatty layer can contribute to changes in fat cells and subsequent contour improvement over time.This is why someone specifically seeking deeper facial or arm contouring may require multiple sessions rather than expecting their final result immediately.
Yes — and please tell us this before your treatment.
Not everyone benefits from reducing facial volume.
This is particularly important if you:
* Already have a slim face
* Have little facial fat
* Have prominent cheekbones
* Are concerned about looking hollow
* Mainly want to improve loose or wrinkly skin
We can assess whether Small at 4 mm is more appropriate so that our treatment objective is skin tightening and collagen remodelling rather than deliberately targeting deeper facial fatty tissue.
Potentially, yes.
Having a slim face doesn’t necessarily mean you don’t need skin tightening.
The important thing is choosing the appropriate handpiece and treatment objective.
For someone with little facial fat but noticeable laxity or wrinkles, our focus may be
tightening and collagen remodelling rather than deeper contouring.
Endymed Eye Lift uses the iFine handpiece with a 1.5 mm heating depth.
It is designed specifically for the more delicate eye area.
We use it for concerns including:
* Fine lines
* Wrinkles
* Crepey-looking skin
* Loss of firmness* Mild skin laxity around the eyes
The objective is to improve the appearance of smoother and firmer eye-area skin through controlled RF heating and collagen remodelling.
Duration: approximately 30 minutes
Price: $78 nett
Cleansing and Hydraclean are included.
It depends on what is causing them.
Endymed Eye Lift primarily targets skin firmness, laxity and fine lines.
Eye bags and dark circles can also be caused by:
* Genetics
* Pigmentation
* Visible blood vessels
* Allergies
* Fluid retention
* Fat pads* Underlying facial anatomy
For this reason, we don’t promise that Endymed Eye Lift will remove every type of eye bag or
dark circle.
It can help with facial contouring when the appropriate handpiece is used. If your facial fullness is partly related to suitable localised fatty volume, Mini-Shaper may be selected to provide deeper heating and contouring.
Over a course of treatments, this can contribute to a slimmer and more defined appearance in suitable customers.
However, facial shape is also influenced by bone structure, muscle, genetics, overall weight
and fat distribution.
Results therefore vary between individuals.
It is important to distinguish between our handpieces.
iFine: Fat reduction is not the treatment objective.
Small: Primarily selected for skin tightening and collagen remodelling without intentionally
targeting the deeper fatty layer.
Mini-Shaper: Its deeper 7 mm heating depth allows deeper tissue and localised fatty volume to form part of the treatment objective.
With appropriate treatment, thermal effects at the targeted fatty layer can contribute to changes in fat cells and subsequent contour improvement over time.This is why someone specifically seeking deeper facial or arm contouring may require multiple sessions rather than expecting their final result immediately.
Yes — and please tell us this before your treatment.
Not everyone benefits from reducing facial volume.
This is particularly important if you:
* Already have a slim face
* Have little facial fat
* Have prominent cheekbones
* Are concerned about looking hollow
* Mainly want to improve loose or wrinkly skin
We can assess whether Small at 4 mm is more appropriate so that our treatment objective is skin tightening and collagen remodelling rather than deliberately targeting deeper facial fatty tissue.
Potentially, yes.
Having a slim face doesn’t necessarily mean you don’t need skin tightening.
The important thing is choosing the appropriate handpiece and treatment objective.
For someone with little facial fat but noticeable laxity or wrinkles, our focus may be
tightening and collagen remodelling rather than deeper contouring.
For Endymed Arms, we use our Mini-Shaper with a 7 mm heating depth.
It may be suitable for customers concerned about:
* Loose-looking arm skin
* Reduced firmness
* Localised fatty volume
* Lack of arm definition
The objective is to improve the appearance of firmer and better-contoured arms over time.
Duration: approximately 30 minutes
Price: $98 nett
Where suitable localised fatty volume contributes to arm size, deeper contouring using Mini- Shaper may contribute to a slimmer-looking contour over a course of treatments.
However, Endymed isn’t a weight-loss treatment.
It is designed for localised treatment, not significant overall body-weight reduction.
Most customers find Endymed relatively comfortable.
The main sensation is progressive warmth as RF energy is delivered into the treatment area.
It isn’t intended to feel like sharp ultrasound shots.
Your therapist monitors the treatment area throughout the session. If the heat becomes uncomfortable, let us know immediately.
Everyone has a different heat tolerance.
Controlled heating is fundamental to radiofrequency treatment.
The aim isn’t simply to make the surface of your skin feel hot.
The RF energy creates a controlled thermal response within targeted tissue, supporting collagen contraction and subsequent collagen remodelling.
With Mini-Shaper, deeper heating can also be incorporated when contouring and localised fatty volume are part of the treatment objective.
Hotter does not automatically mean better.
Correct energy delivery, handpiece selection and treatment protocol matter.
Some customers may notice that the treated area looks firmer, smoother or more defined after a session.However, you shouldn’t judge the full Endymed result immediately.
Collagen remodelling develops gradually after treatment.
Likewise, when deeper contouring is being targeted with Mini-Shaper, changes don’t happen instantaneously.
For more established skin laxity, wrinkles or deeper contouring concerns, multiple sessions are usually more realistic.
There isn’t one fixed number for everyone.
It depends on:
* Your age
* Starting skin condition
* Degree of laxity
* Amount of localised fatty tissue
* Treatment area
* Handpiece selected
* Desired result
* Lifestyle
* Individual biological responseYou are welcome to start with one session and decide whether you want to continue.
At Ombré, you don’t have to purchase a package before trying the treatment.
RF treatment initiates a biological response involving collagen remodelling.
This process doesn’t finish when your treatment session ends.
Changes in the skin can therefore develop progressively over time.
Similarly, when deeper contouring is part of the treatment objective, the body’s response to treated tissue also takes time.
The improvements achieved can be long-lasting, but natural ageing doesn’t stop.
Your skin continues to age every day.If deeper contouring/fat reduction formed part of your treatment and you subsequently gain significant weight, the contour of the treated area may also change again.
Other factors such as:
* Ageing
* Weight fluctuations
* Lifestyle
* Genetics
* Sun exposure
* Skin condition
can influence how long your result remains visible.
Some customers therefore choose maintenance treatments over time
Both treatments can improve the appearance of facial firmness and contours, but they use completely different technologies.
ENDYMED™ — RADIOFREQUENCY
Endymed uses 3DEEP® RF technology to create controlled volumetric heating within targeted tissue.
Because Ombré has different handpieces, we can choose different heating depths depending on whether we’re treating:
1.5 mm iFine → delicate eye area
4 mm Small → facial tightening & collagen remodelling
7 mm Mini-Shaper → deeper contouring where localised fatty volume is also part of the concern
Endymed is particularly attractive for concerns such as:
* Loose or lax skin
* Wrinkly-looking skin
* Fine lines
* Loss of elasticity
* Collagen remodelling
* Skin tightening
* Facial rejuvenation
* Jawline definition
DCL — ULTRASOUND + SCULPTINGDCL uses ultrasound technology delivered as individual focal points, reaching approximately
4.5 mm at the SMAS-level treatment depth.
Rather than volumetric RF heating, DCL concentrates ultrasound energy into targeted points at depth.
We then further enhance the treatment with our hands-on facial sculpting technique — similar in concept to a facial workout or “face yoga” — to work the facial muscles and contours.
DCL may be particularly suitable for customers concerned about:
* More noticeable facial sagging
* Heavier-looking contours
* Fuller lower face
* Double chin
* Loss of facial definition
* Overall contour sagging
Neither treatment is automatically better.
Think about your main concern.“My skin looks loose, wrinkly and less elastic.”
→ ENDYMED may be the treatment to look at.
Its RF heating is particularly useful when the objective is skin tightening, wrinkles, firmness and collagen remodelling.
“My face looks heavier and my contour is sagging.”
→ DCL may be the treatment to look at.
Its ultrasound-based deeper treatment combined with our facial sculpting technique makes it an option for customers wanting a more intensive contouring approach.
“I have loose skin AND a fuller lower face. ”
→ You may potentially be suitable for either approach.
Let us assess your facial condition and explain which treatment better matches your main concern.
Endymed is non-invasive and generally involves minimal downtime.
Some customers may experience temporary:
* Redness
* Warmth
* Flushing
* Mild sensitivity
These normally settle, although individual skin responses vary.
Most customers are able to continue with their normal day.
After your treatment:
* Keep your skin well hydrated
* Apply adequate sun protection
* Keep your skincare gentle if the skin feels sensitive
* Avoid unnecessarily irritating or overheating the treated area immediately afterwards
* Follow any specific advice given by your therapistIf you experience an unexpected or persistent reaction, contact us.
Yes, but timing and disclosure are important.
At Ombré, we recommend waiting at least 1 month after filler treatment before having Endymed. This allows time for the filler and surrounding tissue to settle.
Even if your filler was done more than one month ago, please tell our therapist where you have filler before treatment.
This information can affect our handpiece selection.
In particular, we may avoid using our deeper 7 mm Mini-Shaper over areas containing filler
where its treatment depth may overlap with the area/depth at which the filler was placed.
Our priority is to choose the treatment approach according to both your desired result and your previous procedures.
Please tell us when and where your Botox was performed.
We generally recommend allowing the treatment to settle before performing another energy-based facial treatment in the same area.
If the Botox was recently performed, contact us with the date and treatment area before booking so we can advise whether sufficient time has passed.
If you’re uncertain, you may also check with the doctor or clinic that administered your Botox.
For HIFU and other non-invasive energy-based treatments, we generally recommend waiting at least 1 month before performing Endymed or DCL on the same treatment area.
This gives the tissue time to recover and settle from the previous procedure before another energy-based treatment is performed.
Please tell us what treatment you had and when it was performed when booking.
This is different from a non-invasive treatment.
If you’ve undergone:
* Microneedling
* Fractional/CO₂ laser
* Resurfacing treatment
* Or another procedure that causes an open wound, significant peeling or disruption of the skin barrier the skin must be fully healed before Endymed or DCL can be performed.
We won’t perform an energy-based treatment over skin that is still wounded, inflamed, actively peeling or recovering.
Healing time differs between procedures and individuals, so full skin recovery is more important than following a fixed number of days.
When in doubt, send us details of the treatment and when you had it before booking.
Endymed isn’t suitable for everyone.
Please inform us before booking if you:
* Are pregnant
* Have a pacemaker or implanted electronic device
* Have metal implants in or close to the treatment area
* Have active infection, open wounds or significant inflammation in the treatment area
* Have an active skin condition affecting the treatment area
* Have recently undergone surgery
* Have recently undergone an aesthetic treatment
* Have fillers, implants or other materials in the treatment area
* Have a medical condition that may affect treatment suitability
This isn’t an exhaustive medical screening list.
If you have an existing medical condition, implanted medical device or are under medical care
and aren’t sure whether RF treatment is suitable, please consult your doctor before booking.
It depends on your current skin condition.
Having generally sensitive skin doesn’t automatically mean you can’t receive Endymed.However, if your skin is currently:
* Very irritated
* Inflamed
* Sunburnt
* Experiencing an active flare
* Wounded
* Recovering from another procedure
we may recommend postponing treatment until your skin has recovered.
Please let us know before treatment.
Endymed treatments at Ombré are performed by our trained therapists.
Ombré is a beauty facial studio and we do not have doctors on-site.
Our therapists receive training in the equipment and treatment protocols used for the Endymed services we provide.
If you have a medical condition requiring diagnosis or medical treatment, you should consult an appropriately qualified medical professional.
Before starting, our therapist will discuss the area you’re concerned about and what you’re hoping to achieve.
Please tell us if you:
* Don’t want facial fat reduction
* Have a naturally slim face
* Have fillers or Botox
* Previously had HIFU or another aesthetic treatment
* Have sensitive skin
* Have an existing medical or skin condition
We can then determine the appropriate treatment approach and handpiece before proceeding.
You do not need to choose iFine, Small or Mini-Shaper yourself.
No.
Ombré operates on a pay-per-visit philosophy.
You can try one Endymed session first without committing to a package.
If we have memberships, promotions or other savings available, you’re welcome to consider
them, but they are completely optional.
In many cases, yes.
Endymed may be combined with suitable cleansing, hydration or other facial treatments depending on your skin condition.
However, not every treatment should automatically be combined.
Please tell us what you’re considering when booking so we can advise you and reserve
enough appointment time.
Yes.
When a photograph is identified as an Ombré Endymed customer result, it is from an actual customer treated at Ombré, with permission for the images to be used.
Where possible, we also state the number of sessions completed.
Before-and-after photos show what was achieved for that particular customer.
Age, skin condition, facial structure, amount of facial fat, lifestyle and individual biological response differ, so another customer’s result should be viewed as a reference rather than a guarantee of identical results.
UNDERSTANDING ENDYMED™
Endymed™ is a professional radiofrequency (RF) treatment system using proprietary 3DEEP® technology.
It delivers controlled RF energy to create heating within targeted tissue. This thermal effect is used for concerns such as skin tightening, collagen remodelling, wrinkles and facial or body contouring.
At Ombré, the Endymed treatments we offer are non-invasive — there are no needles, injections or surgical incisions involved.
More importantly, we don’t use just one Endymed handpiece for everyone.
We have iFine, Small and Mini-Shaper, each designed to create heating at a different depth.
3DEEP® is Endymed’s multi-source, phase-controlled radiofrequency technology.
Multiple RF fields work together to deliver controlled energy into the targeted tissue, creating volumetric heating.
This controlled thermal effect can cause an immediate response in existing collagen fibres while also initiating a longer-term collagen-remodelling process.
Over time, this can improve the appearance of:
* Skin laxity
* Fine lines and wrinkles
* Reduced firmness
* Facial contours
* Jawline definition
With the appropriate deeper handpiece, localised fatty volume and deeper contouring can also form part of the treatment objective.
THE 3 ENDYMED HANDPIECES AT OMBRÉ
Because different concerns require treatment at different depths.
According to Endymed’s handpiece specifications, heating depth is influenced by the
geometry of the electrodes together with energy, including power and time.
The three handpieces available at Ombré have different heating depths:
iFine — 1.5 mm heating depth
Main area: Eyes
Our most superficial and targeted Endymed handpiece.
We use iFine around the delicate eye area to focus on concerns such as:
* Fine lines
* Wrinkles
* Crepey-looking skin
* Loss of firmness
* Mild eye-area skin laxity* Collagen stimulation
The objective here is skin tightening and rejuvenation — not fat reduction.
Main area: Face
Small is our facial handpiece when the objective is primarily:
* Skin tightening
* Improving laxity
* Wrinkle reduction
* Firmness
* Collagen remodelling
* Facial rejuvenation
It is particularly useful for customers who do not want us to deliberately target deeper facial fatty tissue.
For example, someone may already have a slim face but feel that their skin is becoming looser or more wrinkly.
In that situation, making the face even slimmer may not be desirable.
Mini-Shaper — 7 mm heating depth
Main areas: Face & Arms
Mini-Shaper provides our deepest heating depth of the three handpieces at 7 mm.
We may select Mini-Shaper when the treatment objective includes:
* Deeper facial contouring
* Fuller lower face
* Double-chin area
* Localised fatty volume
* Jawline definition
* Arm contouring
* Skin tightening together with deeper contouring
Because Mini-Shaper reaches deeper tissue, it can be selected when fatty volume is part of what we want to target, in addition to tightening.
No.This is very important.
Mini-Shaper reaching 7 mm does not automatically make it “better” than Small at 4 mm or
iFine at 1.5 mm.
The correct question is:
“Which tissue are we trying to target?”
If we’re treating delicate eye-area skin, we don’t need a 7 mm treatment.
If someone has a naturally slim face and wants skin tightening without further facial volume
reduction, deeper fat-targeting may not be desirable.
If someone has a fuller lower face and wants deeper contouring, Mini-Shaper may make more sense.
The right handpiece is the one that matches your concern — not simply the deepest one.
ENDYMED V-LIFT
Endymed V-Lift is our RF treatment focusing on the lower face, jawline and double-chin region.
Depending on your facial condition, the treatment objective may be:
Skin tightening & collagen remodelling
OR
Skin tightening + deeper facial contouring
This is why we don’t automatically use the same handpiece for every V-Lift customer.
Duration: approximately 30 minutes
Price: $98 nett
It depends on your face and what you want to achieve.
Small — 4 mm
We may choose Small when you primarily want:* Firmer skin
* Improved skin laxity
* Collagen stimulation
* Wrinkle improvement
* Facial tightening
without intentionally targeting deeper facial fat.
Mini-Shaper — 7 mm
We may consider Mini-Shaper when you have:
* A fuller lower face
* Double chin
* Localised fatty volume
* Heavier-looking contours
and deeper contouring is also part of your desired result.
Our therapist will assess your facial condition and discuss your goal before deciding.
It can help with facial contouring when the appropriate handpiece is used. If your facial fullness is partly related to suitable localised fatty volume, Mini-Shaper may be selected to provide deeper heating and contouring.
Over a course of treatments, this can contribute to a slimmer and more defined appearance in suitable customers.
However, facial shape is also influenced by bone structure, muscle, genetics, overall weight
and fat distribution.
Results therefore vary between individuals.
It is important to distinguish between our handpieces.
iFine: Fat reduction is not the treatment objective.
Small: Primarily selected for skin tightening and collagen remodelling without intentionally
targeting the deeper fatty layer.
Mini-Shaper: Its deeper 7 mm heating depth allows deeper tissue and localised fatty volume to form part of the treatment objective.
With appropriate treatment, thermal effects at the targeted fatty layer can contribute to changes in fat cells and subsequent contour improvement over time.This is why someone specifically seeking deeper facial or arm contouring may require multiple sessions rather than expecting their final result immediately.
Yes — and please tell us this before your treatment.
Not everyone benefits from reducing facial volume.
This is particularly important if you:
* Already have a slim face
* Have little facial fat
* Have prominent cheekbones
* Are concerned about looking hollow
* Mainly want to improve loose or wrinkly skin
We can assess whether Small at 4 mm is more appropriate so that our treatment objective is skin tightening and collagen remodelling rather than deliberately targeting deeper facial fatty tissue.
Potentially, yes.
Having a slim face doesn’t necessarily mean you don’t need skin tightening.
The important thing is choosing the appropriate handpiece and treatment objective.
For someone with little facial fat but noticeable laxity or wrinkles, our focus may be
tightening and collagen remodelling rather than deeper contouring.
ENDYMED EYE LIFT
Endymed Eye Lift uses the iFine handpiece with a 1.5 mm heating depth.
It is designed specifically for the more delicate eye area.
We use it for concerns including:
* Fine lines
* Wrinkles
* Crepey-looking skin
* Loss of firmness* Mild skin laxity around the eyes
The objective is to improve the appearance of smoother and firmer eye-area skin through controlled RF heating and collagen remodelling.
Duration: approximately 30 minutes
Price: $78 nett
Cleansing and Hydraclean are included.
It depends on what is causing them.
Endymed Eye Lift primarily targets skin firmness, laxity and fine lines.
Eye bags and dark circles can also be caused by:
* Genetics
* Pigmentation
* Visible blood vessels
* Allergies
* Fluid retention
* Fat pads* Underlying facial anatomy
For this reason, we don’t promise that Endymed Eye Lift will remove every type of eye bag or
dark circle.
It can help with facial contouring when the appropriate handpiece is used. If your facial fullness is partly related to suitable localised fatty volume, Mini-Shaper may be selected to provide deeper heating and contouring.
Over a course of treatments, this can contribute to a slimmer and more defined appearance in suitable customers.
However, facial shape is also influenced by bone structure, muscle, genetics, overall weight
and fat distribution.
Results therefore vary between individuals.
It is important to distinguish between our handpieces.
iFine: Fat reduction is not the treatment objective.
Small: Primarily selected for skin tightening and collagen remodelling without intentionally
targeting the deeper fatty layer.
Mini-Shaper: Its deeper 7 mm heating depth allows deeper tissue and localised fatty volume to form part of the treatment objective.
With appropriate treatment, thermal effects at the targeted fatty layer can contribute to changes in fat cells and subsequent contour improvement over time.This is why someone specifically seeking deeper facial or arm contouring may require multiple sessions rather than expecting their final result immediately.
Yes — and please tell us this before your treatment.
Not everyone benefits from reducing facial volume.
This is particularly important if you:
* Already have a slim face
* Have little facial fat
* Have prominent cheekbones
* Are concerned about looking hollow
* Mainly want to improve loose or wrinkly skin
We can assess whether Small at 4 mm is more appropriate so that our treatment objective is skin tightening and collagen remodelling rather than deliberately targeting deeper facial fatty tissue.
Potentially, yes.
Having a slim face doesn’t necessarily mean you don’t need skin tightening.
The important thing is choosing the appropriate handpiece and treatment objective.
For someone with little facial fat but noticeable laxity or wrinkles, our focus may be
tightening and collagen remodelling rather than deeper contouring.
ENDYMED ARMS
For Endymed Arms, we use our Mini-Shaper with a 7 mm heating depth.
It may be suitable for customers concerned about:
* Loose-looking arm skin
* Reduced firmness
* Localised fatty volume
* Lack of arm definition
The objective is to improve the appearance of firmer and better-contoured arms over time.
Duration: approximately 30 minutes
Price: $98 nett
Where suitable localised fatty volume contributes to arm size, deeper contouring using Mini- Shaper may contribute to a slimmer-looking contour over a course of treatments.
However, Endymed isn’t a weight-loss treatment.
It is designed for localised treatment, not significant overall body-weight reduction.
WHAT ENDYMED FEELS LIKE
Most customers find Endymed relatively comfortable.
The main sensation is progressive warmth as RF energy is delivered into the treatment area.
It isn’t intended to feel like sharp ultrasound shots.
Your therapist monitors the treatment area throughout the session. If the heat becomes uncomfortable, let us know immediately.
Everyone has a different heat tolerance.
Controlled heating is fundamental to radiofrequency treatment.
The aim isn’t simply to make the surface of your skin feel hot.
The RF energy creates a controlled thermal response within targeted tissue, supporting collagen contraction and subsequent collagen remodelling.
With Mini-Shaper, deeper heating can also be incorporated when contouring and localised fatty volume are part of the treatment objective.
Hotter does not automatically mean better.
Correct energy delivery, handpiece selection and treatment protocol matter.
RESULTS
Some customers may notice that the treated area looks firmer, smoother or more defined after a session.However, you shouldn’t judge the full Endymed result immediately.
Collagen remodelling develops gradually after treatment.
Likewise, when deeper contouring is being targeted with Mini-Shaper, changes don’t happen instantaneously.
For more established skin laxity, wrinkles or deeper contouring concerns, multiple sessions are usually more realistic.
There isn’t one fixed number for everyone.
It depends on:
* Your age
* Starting skin condition
* Degree of laxity
* Amount of localised fatty tissue
* Treatment area
* Handpiece selected
* Desired result
* Lifestyle
* Individual biological responseYou are welcome to start with one session and decide whether you want to continue.
At Ombré, you don’t have to purchase a package before trying the treatment.
RF treatment initiates a biological response involving collagen remodelling.
This process doesn’t finish when your treatment session ends.
Changes in the skin can therefore develop progressively over time.
Similarly, when deeper contouring is part of the treatment objective, the body’s response to treated tissue also takes time.
The improvements achieved can be long-lasting, but natural ageing doesn’t stop.
Your skin continues to age every day.If deeper contouring/fat reduction formed part of your treatment and you subsequently gain significant weight, the contour of the treated area may also change again.
Other factors such as:
* Ageing
* Weight fluctuations
* Lifestyle
* Genetics
* Sun exposure
* Skin condition
can influence how long your result remains visible.
Some customers therefore choose maintenance treatments over time
ENDYMED VS DCL
Both treatments can improve the appearance of facial firmness and contours, but they use completely different technologies.
ENDYMED™ — RADIOFREQUENCY
Endymed uses 3DEEP® RF technology to create controlled volumetric heating within targeted tissue.
Because Ombré has different handpieces, we can choose different heating depths depending on whether we’re treating:
1.5 mm iFine → delicate eye area
4 mm Small → facial tightening & collagen remodelling
7 mm Mini-Shaper → deeper contouring where localised fatty volume is also part of the concern
Endymed is particularly attractive for concerns such as:
* Loose or lax skin
* Wrinkly-looking skin
* Fine lines
* Loss of elasticity
* Collagen remodelling
* Skin tightening
* Facial rejuvenation
* Jawline definition
DCL — ULTRASOUND + SCULPTINGDCL uses ultrasound technology delivered as individual focal points, reaching approximately
4.5 mm at the SMAS-level treatment depth.
Rather than volumetric RF heating, DCL concentrates ultrasound energy into targeted points at depth.
We then further enhance the treatment with our hands-on facial sculpting technique — similar in concept to a facial workout or “face yoga” — to work the facial muscles and contours.
DCL may be particularly suitable for customers concerned about:
* More noticeable facial sagging
* Heavier-looking contours
* Fuller lower face
* Double chin
* Loss of facial definition
* Overall contour sagging
Neither treatment is automatically better.
Think about your main concern.“My skin looks loose, wrinkly and less elastic.”
→ ENDYMED may be the treatment to look at.
Its RF heating is particularly useful when the objective is skin tightening, wrinkles, firmness and collagen remodelling.
“My face looks heavier and my contour is sagging.”
→ DCL may be the treatment to look at.
Its ultrasound-based deeper treatment combined with our facial sculpting technique makes it an option for customers wanting a more intensive contouring approach.
“I have loose skin AND a fuller lower face. ”
→ You may potentially be suitable for either approach.
Let us assess your facial condition and explain which treatment better matches your main concern.
DOWNTIME & AFTERCARE
Endymed is non-invasive and generally involves minimal downtime.
Some customers may experience temporary:
* Redness
* Warmth
* Flushing
* Mild sensitivity
These normally settle, although individual skin responses vary.
Most customers are able to continue with their normal day.
After your treatment:
* Keep your skin well hydrated
* Apply adequate sun protection
* Keep your skincare gentle if the skin feels sensitive
* Avoid unnecessarily irritating or overheating the treated area immediately afterwards
* Follow any specific advice given by your therapistIf you experience an unexpected or persistent reaction, contact us.
BOTOX, FILLERS & OTHER AESTHETIC TREATMENTS
Yes, but timing and disclosure are important.
At Ombré, we recommend waiting at least 1 month after filler treatment before having Endymed. This allows time for the filler and surrounding tissue to settle.
Even if your filler was done more than one month ago, please tell our therapist where you have filler before treatment.
This information can affect our handpiece selection.
In particular, we may avoid using our deeper 7 mm Mini-Shaper over areas containing filler
where its treatment depth may overlap with the area/depth at which the filler was placed.
Our priority is to choose the treatment approach according to both your desired result and your previous procedures.
Please tell us when and where your Botox was performed.
We generally recommend allowing the treatment to settle before performing another energy-based facial treatment in the same area.
If the Botox was recently performed, contact us with the date and treatment area before booking so we can advise whether sufficient time has passed.
If you’re uncertain, you may also check with the doctor or clinic that administered your Botox.
For HIFU and other non-invasive energy-based treatments, we generally recommend waiting at least 1 month before performing Endymed or DCL on the same treatment area.
This gives the tissue time to recover and settle from the previous procedure before another energy-based treatment is performed.
Please tell us what treatment you had and when it was performed when booking.
This is different from a non-invasive treatment.
If you’ve undergone:
* Microneedling
* Fractional/CO₂ laser
* Resurfacing treatment
* Or another procedure that causes an open wound, significant peeling or disruption of the skin barrier the skin must be fully healed before Endymed or DCL can be performed.
We won’t perform an energy-based treatment over skin that is still wounded, inflamed, actively peeling or recovering.
Healing time differs between procedures and individuals, so full skin recovery is more important than following a fixed number of days.
When in doubt, send us details of the treatment and when you had it before booking.
SAFETY & SUITABILITY
Endymed isn’t suitable for everyone.
Please inform us before booking if you:
* Are pregnant
* Have a pacemaker or implanted electronic device
* Have metal implants in or close to the treatment area
* Have active infection, open wounds or significant inflammation in the treatment area
* Have an active skin condition affecting the treatment area
* Have recently undergone surgery
* Have recently undergone an aesthetic treatment
* Have fillers, implants or other materials in the treatment area
* Have a medical condition that may affect treatment suitability
This isn’t an exhaustive medical screening list.
If you have an existing medical condition, implanted medical device or are under medical care
and aren’t sure whether RF treatment is suitable, please consult your doctor before booking.
It depends on your current skin condition.
Having generally sensitive skin doesn’t automatically mean you can’t receive Endymed.However, if your skin is currently:
* Very irritated
* Inflamed
* Sunburnt
* Experiencing an active flare
* Wounded
* Recovering from another procedure
we may recommend postponing treatment until your skin has recovered.
Please let us know before treatment.
YOUR FIRST ENDYMED APPOINTMENT
Endymed treatments at Ombré are performed by our trained therapists.
Ombré is a beauty facial studio and we do not have doctors on-site.
Our therapists receive training in the equipment and treatment protocols used for the Endymed services we provide.
If you have a medical condition requiring diagnosis or medical treatment, you should consult an appropriately qualified medical professional.
Before starting, our therapist will discuss the area you’re concerned about and what you’re hoping to achieve.
Please tell us if you:
* Don’t want facial fat reduction
* Have a naturally slim face
* Have fillers or Botox
* Previously had HIFU or another aesthetic treatment
* Have sensitive skin
* Have an existing medical or skin condition
We can then determine the appropriate treatment approach and handpiece before proceeding.
You do not need to choose iFine, Small or Mini-Shaper yourself.
No.
Ombré operates on a pay-per-visit philosophy.
You can try one Endymed session first without committing to a package.
If we have memberships, promotions or other savings available, you’re welcome to consider
them, but they are completely optional.
In many cases, yes.
Endymed may be combined with suitable cleansing, hydration or other facial treatments depending on your skin condition.
However, not every treatment should automatically be combined.
Please tell us what you’re considering when booking so we can advise you and reserve
enough appointment time.
Yes.
When a photograph is identified as an Ombré Endymed customer result, it is from an actual customer treated at Ombré, with permission for the images to be used.
Where possible, we also state the number of sessions completed.
Before-and-after photos show what was achieved for that particular customer.
Age, skin condition, facial structure, amount of facial fat, lifestyle and individual biological response differ, so another customer’s result should be viewed as a reference rather than a guarantee of identical results.
Still Not Sure What To Choose?
- Your age
- The area you want to improve
- Your main concern — wrinkles, loose skin, sagging, double chin, facial fullness or something else
- Whether you WANT or DON’T WANT facial fat reduction
- Whether you’ve had fillers, Botox, HIFU, lasers or other aesthetic procedures